Some Porsche chassis parts can't be used with other cars. Different parts may be used in cars of the same model range depending on their generation, engine, production date, drivetrain, and any extras that came with them from the factory.

You can look for suspension components for models including-

• Porsche 911 - Suspension parts for various generations and types, including suitable Carrera, Turbo and GT models.
• Porsche 718 Cayman and Boxster - Suspension parts like model specific dampers, control arms, springs, bushings and more.
• Porsche Cayenne - Suspension parts for different versions, including both traditional and air suspension setups that work with each other.
• Porsche Macan - Replacement suspension parts for that model year and a suspension system that was already installed.
• Porsche Panamera - Vehicle specific suspension parts, adapted to the vehicle generation, model and oem specifications.
• Porsche Taycan - Compatible suspension components for the vehicle's specific electric-platform configuration.

Parts made for a certain generation may also be needed for older Porsche models. Before placing an order - you should always make sure that the part you need is available for your specific car.

Replace suspension parts carefully because various mounting points, sizes, damping methods, and original options can lead them to not operate together.

Check the following things before you place an order-

• Vehicle identification number (VIN)- The VIN can help you figure out what the car was originally built with.
• Production year and model generation- Registration year alone may not establish the exact component fitment.
• Front or rear axle- Confirm where the component is installed.
• Suspension configuration- Check whether the vehicle has standard, adaptive, or air suspension, where applicable.
• Original part number- Compare the existing part number with the replacement listing when available.
• Factory options and vehicle variant- Different trims and performance versions may use different suspension components.

If you are unsure which part is suitable, provide the VIN and any available part number to Exotic Auto Parts for fitment assistance.

Standard, Adaptive and Air Suspension: What to Check

Depending on the model and how it was set up at the factory - Porsche cars can have different suspension setups. Knowing what system is installed makes it easier to get the right parts.

Standard suspension usually incorporates conventional springs and shock absorbers. Replacement parts must be of original size and intended specification.

Adaptive suspension, including Porsche Active Suspension Management (PASM) on equipped vehicles, adjusts damping characteristics according to the system's design. Compatible dampers and associated components are important when repairing these systems.

On some types, air suspension uses air springs and supporting parts to change the height of the ride. If a car is sitting oddly, it could be because of a problem with the air spring, the compressor, the valves or something else. We have to see it to know the real cause.

The systems won't work together just because the components fit in the same space of the vehicle. Always check the original specs before replacing or converting suspension.

When shopping for Porsche suspension components, it is important to understand the differences between the available product types.

• Genuine Porsche parts- Parts supplied via Porsche’s genuine parts network and marked for the relevant vehicle application.
• OEM parts- Parts supplied by an original-equipment manufacturer; the supplier and application have been determined. Don’t take it for assumption that an OEM-branded product is a real Porsche part.
• Aftermarket parts- Replacement parts produced by independent manufacturers. Options may encompass variations in design, material, performance characteristics and intended use.

What is right for you will depend on your vehicle's needs - what you want to use it for, what you can afford and the specs of the component available. For road vehicles, think about correct fitment and suitability for the original suspension setup.

Suspension wear can sneak up on you, and it’s easy to miss little changes in ride quality or handling. Typical warning signs include-

• Makes knocking or clunking noises over bumps.
• After travel excessive bouncing on uneven surfaces.
• Uneven tyre wear or variations in steering response.
• Visual damage, leaking dampers, or worn bushings.
• Suspension or uneven ride height warnings on vehicles with air or electronically controlled suspension.

These symptoms don’t always point to one failed component. For example uneven tyre wear can also be caused by incorrect wheel alignment. Joints or mounts cause suspension noises.

A professional technician can inspect the suspension system for wear and damage and recommend replacements. If the vehicle’s handling changes suddenly, or a suspension warning signals a significant malfunction, have the car evaluated at the earliest opportunity.

It truly depends on what part you are looking at. The rest of the suspension might be fine but the shock absorber may need to be changed. Bushings, springs and joints can also wear at various rates thus mileage on its own won't tell you when something needs replaced.

Road conditions are important. A Porsche on smooth motorways will wear its suspension differently from one on potholes, bumpy roads or track days.

Knocking on a bump can signal disaster. Sometimes, the car may sit a little lower on one side or seem less planted in turns. It’s important discussing these to your mechanic, even if they’re only happening once in a while.

During a servicing check for leaking dampers, fractured bushings and any play in the joints. It’s worth knowing what it’s attached to before replacing a worn part, especially on an older Porsche.

And if the repair needs removing or altering parts that influence the wheel angles, determine if an alignment is necessary thereafter. It can spare you from having to cope with uneven tyre wear later on.

The Porsche suspension parts that are correct for your car are determined by the model, year of production and suspension specification. An exact fitment makes sure the right replacement, from shock absorbers and control arms to coil springs and air suspension parts.

Since 2010, Exotic Auto Parts has been your source for Porsche Suspension parts and we can help you get what you need and fitment assistance. Please include your VIN, vehicle model, manufacture year, and original part number (if available) so we can find the correct replacement.

Browse our inventory or contact our team to help you locate the parts you need to maintain your Porsche’s ride quality and handling.