Bad Oxygen Sensor in a McLaren 720S? 7 Symptoms, Causes and Fixes
The McLaren 720S is powered by a twin-turbocharged V8, paired with advanced engine management for some seriously impressive performance. The system has oxygen sensors that measure the exhaust gases and help the engine control unit (ECU) to maintain the correct air-fuel mixture.
Changes in fuel consumption, engine performance or warning lights on the dashboard can be noticed by drivers with a faulty oxygen sensor. But other engine or exhaust problems could cause these symptoms.
Owners of the McLaren 720S can identify whether they need to repair an oxygen sensor—and whether repairs are necessary at all—by knowing the warning signs, common causes, and how to diagnose the problem.
What does an oxygen sensor do in a McLaren 720S?
To start with, even cars need oxygen just like humans do, and the sensor we are talking about here helps in the concentration of oxygen in the exhaust gas; then the ECU is the one taking the info and adjusting the fuel delivery, keeping the air-fuel ratio to the point.
These sensors have two ways around:
- Upstream oxygen sensors are the ones that has a work to monitor the exhaust gas before they are coming in the catalytic converter.
- Downstream oxygen sensors are exhaust gas sensors located downstream of the catalytic converters. They are used to analyze the effectiveness of the catalytic converter.
The two locations are for different jobs, so it is important to have the proper sensor location when diagnosing a defect or getting a replacement part.
7 Symptoms Of A McLaren 720S Oxygen Sensor Failure
If your oxygen sensor is faulty, it can affect your fuel mixture, engine performance and emissions. Here are seven warning indicators to watch out for.
1. Check engine light or oxygen sensor trouble codes
Your check engine light could be on due to an issue with the oxygen sensor circuit, heating or performance. Diagnostic codes such as P0130 and P0133 can indicate a problem with the sensor or its circuit response, and P0171 and P0172 mean lean and high fuel mixtures, respectively, and demand further study.
A diagnostic scan can tell you which system is involved before you start replacing parts.
2. Fuel consumption has skyrocketed
If your McLaren 720S is using more fuel than it should, it may be that the oxygen sensor feedback in your car is faulty and cannot correctly adjust the fuel mixture.The ECU may make improper repairs depending on the malfunction, which may cause high fuel consumption.
Check the sensor readings as well. Fuel pressure, injectors and other engine management items.
3. Strong or Abnormal Exhaust Odors
If a sensor is faulty the fuel mixture may not be managed correctly and could lead to excess unburnt fuel in the exhaust. You may detect a strong petrol smell or a sulphur-like rotten-egg stench.
However, these odours can also point to fuel system or catalytic converter problems and should be investigated.
4. Smoke from exhaust pipe
Black or dark exhaust smoke is a sign of a fuel mixture that is too rich.Oxygen sensor feedback can be wrong and the ECU can make wrong fuel adjustments.
But this can also be associated with difficulties with the sensors, faulty injectors, fuel pressure and other engine faults, which should also be taken into account.
5. Hesitation, Rough Idle, Poor Performance
The oxygen sensor might be giving incorrect readings affecting the fuel mixture management and causing the car to slow down, uneven idling or poor acceleration.
If your 720S doesn’t feel as snappy as it once did, the ignition, fuel delivery, intake systems and the performance of the oxygen sensor are worth a look.
6. Too Much Exhaust or Failing an Emissions Test
Oxygen sensors are used to control the air-fuel mixture and monitor the performance of the catalytic converter. A faulty sensor can trigger emissions control problems that lead to higher exhaust emissions or cause a vehicle to fail inspection.
Diagnostic testing should determine if the fault is with the sensor, catalytic converter or other portion of the exhaust system.
7. Lean or Rich Readings from an Exhaust Leak
This can be bad, if there is a leak in an exhaust system, then it can fool the oxygen sensor, and the sensor will not know what exactly is going on.
The ECU could perceive these values as being lean and increase the amount of gasoline.
Unusual sensor readings: If the sensors’ readings are not normal, check the exhaust manifolds, couplings and downpipes for leaks or damage on a McLaren 720S. Don't presume a defective sensor is responsible until the exhaust system has been investigated.
What Causes McLaren 720S Oxygen Sensor Failure?
1. Age and normal wear: Cars don't stop running, so the internal parts get into a problem after some time, and the same goes with the sensors.
2. Contamination of the exhaust: Things like oil and coolant are also one of the reasons that can give a hard time to the sensors.
3. Wiring or connector issues: The signals can possibly be interrupted in case of heat, vibration, or any sort of physical damage.
4. Exhaust Leaks: Now this one is major; the leaks can confuse the sensor’s reading, and it can be a problem, a big one.
5. Heat exposure: There is a limit of heat that any of the part can handle, but when it goes above that for the sensor, the damage happens.
6. Running Engine Problem: Continuous misfires or bad fuel delivery can affect the exhaust conditions and can reduce the life of the sensor.
It is important to identify the original cause. Just changing the sensor may not clear the warning if the wiring, exhaust or engine problem is not corrected.
Can a Bad O2 Sensor Affect the Performance of the McLaren 720S?
Yes a bad O2 sensor can cause engine management problems but severity of that depends on the type of fault and conditions of operation.
Possible effects are:
- Fuel control: Incorrect feedback adjustment may affect the air-fuel ratio.
- Fuel economy: Poor control of the mixture means more fuel is consumed.
- Engine response: Certain faults may cause erratic or hesitant operation.
- Emissions: Poor readings can affect emissions control.
- Warning lights: The ECU may turn on the check engine light when it detects a relevant fault.
A sensor failure is not necessarily a sign of mechanical damage to the engine. But if you keep getting engine warnings, or your engine is running funny, you should check it out sooner than later.
How to Diagnose an O2 Sensor Problem
A proper diagnosis avoids unnecessary replacement costs and makes sure that the real problem is corrected.
Make sure you perform these:
- Read ECU: Use an appropriate diagnostic tool to read stored and pending fault codes.
- Review live data: View oxygen sensor readings, response behavior and fuel trim information as applicable.
- You must have a look at all the electrical fittings like wiring, connectors, and other visible things that tell more about heat and physical damage.
- Look for exhaust leaks: Look for exhaust system leaks that could impact sensor performance.
- Compare sensor operation to manufacturer diagnostic specs.
Testing the McLaren 720S accurately may require manufacturer-specific information and specialist diagnostic equipment.
Real vs Aftermarket McLaren 720S Oxygen Sensors
If it’s determined that replacement is needed, owners can look at either genuine replacement sensors or aftermarket sensors.

Genuine sensors provide an original-specification replacement. Quality aftermarket options may be appropriate where compatibility and technical specifications have been verified.
What to look for when buying an O2 sensor replacement
Before you order an oxygen sensor for McLaren 720S make sure you have the following information:
- Vehicle Identification Number (VIN) - Used to identify the correct vehicle spec.
- Year and type. Check specific vehicle applications.
- Compare the replacement listing to the existing sensor reference. The original part number.
- Now, the placement: you need to understand if it is upstream or downstream.
- Check that all the connectors and wirings are done well and right.
This is especially important when comparing genuine and aftermarket McLaren 720S parts, as sensors that look visually similar may not be interchangeable in application.
When To Replace A McLaren 720S Oxygen Sensor
The life of an oxygen sensor varies on driving conditions, maintenance and exposure to exhaust pollutants. When replacement may be needed:
The sensor is not working; diagnostic tests confirm.
- A circuit or heater problem has been found and remains.
- Sensor readings are outside manufacturer standards.
- Physical damage or contamination will degrade performance.
Before replacing the sensor check for wiring problems or exhaust leaks. An expert can find the problem and get the right replacement.
Conclusion
Original specification replacement sensors are genuine and quality aftermarket solutions might also be suitable provided compatibility and technical standards are checked.
Oxygen sensor issues can badly impact the McLaren 720S fuel efficiency, emissions and engine performance. Early identification of symptoms and proper diagnosis of the defect helps to ensure the correct replacement.
Need help with VIN based fitment & international shipping of authentic OEM & select aftermarket McLaren 720S parts? Contact Exotic Auto Parts. Trusted since 2010.