Save 14%
Tie Rod for Bentley Bentayga – OEM 4M0 423 810 C
Bentley's genuine Tie Rod, catalogued under OEM 4M0 423 810 C. Supplied through approved channels, not aftermarket copies. Confirmed fitment: Benta...
View full details
Find the Steering Component You Need
A steering system consists of mechanical linkages and in some vehicles, hydraulic or electronic assistance components. If you know the part you need then it will help you to narrow down the suitable replacements.
The steering rack converts the driver's inputs into motion of the front wheels. The assembly may contain internal gearing, hydraulic control components, seals and mounting points depending on the application.
When repairing a Bentley steering rack, look at the assembly reference not how it looks. Left hand-drive and right hand drive racks have distinct versions or system specs in some applications.
Then a rack can be fixed if only serviceable sections are destroyed. Condition of assembly and availability of parts will determine repair or replacement.
Hydraulic power steering systems rely on a pump to help steer. Pipes and hoses move the fluids between the relevant components . Seals and connections help maintain pressure .
When sourcing a replacement pump check the mounting arrangement, pulley or drive configuration where applicable and original part number. Check routing, connection type and if the line required is a pressure or return line for hoses and pipes.
A leak in the fluid doesn’t automatically mean the pump needs to be replaced. A hose, fitting, seal, or steering rack leak could be the cause. Purchasing superfluous parts can be avoided by knowing where it comes from.
These parts make it possible for the steering rack to move the wheels. Inner tie rod ends, outer track rod ends, and other connection parts all do different things and should be labelled accordingly.
Wear can lead to problems with balance, too much steering play or knocking sounds. When ordering, specify which joint has failed and verify the correct side and application. A steering linkage that looks like the original part might not be the same size or have the same connections.
Rack boots keep dirt and moisture off exposed parts of the steering linkage. Hydraulic assisted systems have the hydraulic fluid with seals.
Check for contamination or damage to adjacent components if a boot is torn. If the rack is good shape then a replacement boot could do the trick. It may be that something is leaking fluid or there is internal wear that needs further inspection.
You can’t just buy any repair kit. Identification and parts reference Steering rack Check to see if a suitable kit is available for your application.
Between the steering wheel and the steering gear are the steering column and the middle shaft. The assembly might also have joints, switches, wiring, or electronic steering parts, depending on the car.
Check assembly and equipment specifications before replacing these parts. Diagnostic testing and calibration may be needed for electronic defect fixes. Do not choose a replacement because the connector or housing appears identical.
The exact configuration of the vehicle is one of the most important checks when sourcing Bentley steering parts.
Left-hand drive versus right-hand drive- Steering racks, pipes, brackets and associated parts may vary depending on the steering position. This is particularly relevant in sourcing components cross-border.
Model generation- A Continental GT from one generation may have a different steering assembly than a later generation. Same goes for the Flying Spur and other Bentley models.
Production changes- Manufacturers may change components during a model’s production run. A newer part number may replace an earlier reference but the replacement must be confirmed for the specific vehicle.
Hydraulic and electronic specifications- Electronic and hydraulic parameters Systems for steering assistance and related controls can differ. Verify the original equipment before selecting a substitute or substitute.
Individual component versus complete assembly- In many cases a worn tie rod end or torn rack boot may not need a whole steering rack. In contrast, internal rack damage could call for a bigger repair.
These differences are especially important for specialist vehicles, where parts that look similar should not be assumed to be interchangeable.
The proper application differs from vehicle to vehicle - so use the model names as a starting point and not as final proof of fitment.
Chassis numbers and original parts catalogues are useful for older automobiles. Give the vehicle and component specifics if you don't know the part number.
Use this information when preparing a parts enquiry:
If a workshop has already diagnosed the fault, share its parts reference where possible. This can make the enquiry more precise than describing a symptom alone.
When you compare replacement options, the product description is important.
Genuine Bentley parts are parts which are supplied as genuine parts and bear the Bentley brand. Identify the product - Check the part number and vendor information.
OEM parts are original equipment manufacturer terminology, but sellers don't always use it consistently. The label alone does not guarantee the product to be genuine Bentley-branded stock.
Aftermarket parts are made by independent manufacturers. Specifications, materials and compatibility vary by product, therefore each should be checked against the requirements of the vehicle.
Steering components, especially, need precise fitment and suitability as these components affect vehicle control. Don't just go by the price or a general compatibility statement but look at the actual product specification and intended use.
Bentley owners, workshops and trade buyers have trusted Exotic Auto Parts for steering parts since 2010. Give your VIN or part number to check compatibility, cost and availability. We offer retail and wholesale support and worldwide shipping.
Call Exotic Auto Parts today for Bentley steering parts, compatibility, pricing and international shipping.
Yes. The original part number is a good place to start looking for the correct assembly but it is still a good idea to make sure that it fits your car. Part numbers get superseded and configurations change over time and both of these can impact compatibility.
Not always. On some models, the rack assembly and its components differ depending on which side the steering wheel is on. It’s best to check the part reference against your VIN or chassis number.
Not necessarily. The leak may come from a pipe, hose, seal or connector, not the rack. A professional should find the source and decide whether to fix or replace.
Yes. Just tell us your Bentley model, year, VIN or chassis number and part description. More detail makes part references easier to find.
Yes. Retailers, workshops and other trade buyers are invited to contact us for quantities, pricing and availability.
Yes. Exotic Auto Parts ships to anywhere in the world. Delivery options, costs and timescales will vary depending on your location and the availability of the part.
Tell us what you need — we specialise in genuine parts for luxury and performance vehicles.
Should you be unable to locate the required part, please reach out to us for assistance.